Global
- Beam Power
- Specifies the beam energy input.
- The value is 1W.
- Defocusing Length
- Specifies the defocusing length.
- The value is 0mm.
- Jump Speed
- Specifies the default speed of the beam between the end of a track and start of a new
one.
 By default, Linking Speed is set to 3m/s.
- Delay After Jump
- Inserts a delay time before the beam starts.
-
By default, The value is 0s.
Continuous
- Scan speed
- Specifies the scanning speed.
-
By default, The value is 1m/s.
Point to Point
- Beam Exposure Time
- Length of time a point of the part is exposed to the laser beam.
- Point to Point distance
- Distance between two consecutive points of the same scan path.
|