Sketcher

The Sketcher options let you customize (brief_summary_of_options) for Sketcher.

This page discusses:

Grid

Display
Defines whether the grid is displayed.

By default, this check box is selected.

Adaptive Grid
Enables change of grid size as you zoom in or zoom out, in the sketch plane. The current grid size is displayed at the top of the work area.

By default, this check box is selected.

Snap to point
Defines whether annotations are snapped to the grid point.

By default, this check box is selected.

Allow Distortions
Defines whether grid spacing and graduations are the same horizontally and vertically.

By default, this check box is cleared.

Horizontal spacing
Defines spacing in the horizontal direction.

By default, the value is 100 mm.

Vertical spacing
Defines spacing in the vertical direction. You can define the value for V only if the Allow Distortions check box is selected.

By default, the value is 100 mm.

Step
Defines the grid graduations in horizontal and vertical directions. You can define the value for the vertical step only if the Allow Distortions check box is selected.

By default, the value is 10 for both horizontal and vertical directions.

Automatic color (low light if not activated)
Automatically changes the grid color depending on the background color, to highlight the grid.

By default, this check box is cleared.

Sketch Plane

Shade sketch plane
Defines whether a shaded plane is displayed in the Sketcher app representing the sketch plane.

By default, this check box is cleared.

Position sketch plane parallel to screen
Defines if the sketch plane is positioned parallel to the screen when you enter in the Sketcher app, otherwise the default orientation is kept. Selecting this option enables Minimize viewpoint transformation check box.

By default, this check box is selected.

Minimize viewpoint transformation
Defines whether to keep the orientation of the sketch axis as close as possible to original 3D position and orientation.

If you select this option when entering the Sketcher app, the sketch plane aligns itself in such a way that the 2D viewpoint in Sketcher becomes similar to that of the 3D viewpoint.

3D Viewpoint

Minimize viewpoint transformation option not selected

Minimize viewpoint transformation option selected

By default, this check box is selected.

Visualization of the cursor coordinates
Defines whether the cursor coordinates are displayed, near the cursor, within the geometry.

By default, this check box is selected.

Visualization of the Context Bar
Defines whether the context toolbar is displayed as you draw or select sketch elements.

By default, this check box is selected.

Visualization of the positioning options at the creation
Defines whether the positioning options (Sketch Positioning dialog box) is displayed at the time of creation of a sketch.

By default, this check box is selected.

Add construction geometries for the newly created sketch
Defines whether the construction elements created in a new sketch should be visible outside Sketcher or not.

By default, this check box is cleared.

Hide or Show Outputs at the same time as the sketch
The output elements are hidden when hiding the sketch node, and are shown when showing the sketch node.

By default, this check box is not selected.

Geometry

Create circle and ellipse centers
Defines whether the center points are created for the circles and ellipses at the time of their creation.

By default, this check box is selected.

Allow direct manipulation
Defines whether you are able to move geometry using the mouse according to the Solving Mode options.

By default, this check box is selected.

Solving mode for moving elements

Click Dragging of elements to access this section.

Standard mode
Moves as many elements as possible with respect to existing constraints.

By default, this option is cleared.

Minimum move
Moves as few elements as possible with respect of existing constraints.

By default, this option is selected.

Drag elements end points included
Moves the elements with their end points.

By default, this check box is selected.

Tip: Click Less Options to hide this section.

Constraint

Creates the geometrical constraints
Defines whether the geometrical constraints detected by the SmartPick tool are created. This option is also available in the action bar.

By default, this check box is selected.

Creates the dimensional constraints
Defines whether the dimensional constraints detected by the SmartPick tool are created. This option is also available in the action bar .

By default, this check box is selected.

Automatic Dimensional Constraints Creation
Creates detected internal dimensional constraints automatically as you create a sketch. See Sketcher User's Guide: Setting Constraints: Working with Dimensional/Geometrical Constraints: Display Constraints Automatically.

By default, this check box is cleared.

SmartPick
Click this to display the SmartPick Detection and Snapping options.

Detection

Support lines and circles

Defines whether the line and arc of circle support are detected.

By default, this check box is selected.

Alignment

Defines whether alignment constraint is detected.

By default, this check box is selected.

Parallelism

Defines whether parallelism constraint is detected.

By default, this check box is selected.

Perpendicularity

Defines whether perpendicularity constraint is detected.

By default, this check box is selected.

Tangency

Defines whether tangency constraint is detected.

By default, this check box is selected.

Horizontal and vertical

Defines whether horizontal and vertical constraints are detected.

By default, this check box is selected.

Snapping

Snap mode

Defines whether the snapping is done on all the visible elements or only on the last flown over element. You can select one of the following options:
  • All visible elements
  • Last flown over element
Notes:
  • For internal geometries, if All visible elements is selected, then all the visible elements are considered for snapping.
  • For background elements, if All visible elements is selected, then only the last 5 flown over background elements are considered for snapping.

By default, All visible elements option is selected.

Background elements

Defines whether the snapping is possible on the background elements. For more information, see Sketcher User's Guide: Using Smartpick.

By default, this check box is cleared.

Colors

Default color of the elements
Defines the color of the geometrical elements.

By default, the color is black.

Visualization of diagnosis
Defines whether the diagnosis colors are applied.

By default, this check box is selected.

Diagnosis colors
Click Colors definition to display diagnosis colors options.

Over-constrained elements

Defines the color of over-constrained elements.

By default, the color is magenta.

Inconsistent elements

Defines the color of inconsistent elements.

By default, the color is red.

Not-changed elements

Defines the color of unchanged elements.

By default, the color is brown.

Iso-constrained elements

Defines the color of iso-constrained elements.

By default, the color is green.

Note: Masks of these colors also appear on the sketch features in the tree to indicate the constraint diagnosis of the respective sketches.

These masks are not displayed for under-constrained sketches (including empty sketches) and Paste Special – Link as results.

Colors

Protected elements

Defines the color of protected elements.

By default, the color is yellow.

Construction elements

Defines the color of construction elements.

By default, the color is grey.

SmartPick

Defines the color of the SmartPick assistant elements and symbols.

By default, the color is blue.

Update

Generate update errors when the sketch is under-constrained
Ensures that the Update Diagnosis dialog box appears to inform you that the sketch you have modified is under-constrained.

By default, this option is cleared.

Appearance of dialog boxes

Open dialog boxes with legacy appearance
Select this check box to switch to the classic appearance of dialog boxes.

Clear this check box to change the appearance of the dialog boxes.

By default, this check box is cleared.