Exchange Management: 3D XML

Geometric Formats

XML Tessellation

Select XML Tesselation for the representation of a part to be provided by a list of organized triangles (mesh) in XML format. This setting can be used for easy geometry sharing.

With this format, Lineic elements (wires, axis systems, points) and 3D annotations (FT&A) are not available in the 3D XML. For performance purposes, the simplification can be done on the geometry (grouping of faces).

Static Tessellation

Select Static Tessellation for the representation of a part to be provided by a compressed triangular mesh with static accuracy.

With this format, Lineic elements (wires, axis systems, points) and 3D annotations (FT&A) are available in the 3DXML.

Repair Site Ownership: Conflict Management

Automatically manage conflict at import

Select Automatically manage conflict at import to enable the choice of an importing strategy for all end users across the enterprise.

Keep local

Select Keep local to always maintain the local version of the PLM entities during import. All the modifications within the incoming version are lost.

Take incoming

Select Take incoming to always maintain the incoming version of the PLM entities during import. All the local versions and modifications are overwritten and lost.

Waive: Conflict Management

For more information, see Repair Site Ownership: Conflict Management.

Import as Reference

Reidentification at import

Lets you to reidentify objects during Import As Reference to identify the objects to be imported with the local site identification rules.

Downward Compatibility

Automatically manage weakened data import

Select the Automatically manage weakened data import check box to automatically accept or refuse the extracted data to be imported in the downward compatibility mode.

Accept weakened data

Select Accept weakened data to accept the extracted data to be imported in the downward compatibility mode.

Refuse weakened data

Select Refuse weakend data to refuse the extracted data to be imported in the downward compatibility mode.