Geometry
- Tolerances
- Constraint
- Defines the continuity tolerance to be kept for element creation or modification.
By default,
the value is 0.1.
- Deviation
- Defines the deviation tolerance for curve and surface conversion using the app specific commands, for example Converter
Wizard in FreeStyle Shape Design and Curve and Surface
Conversion in ICEM Shape Design.
By default, the value is 0.1.
- Order
- Defines the maximum order when converting elements.
By default,
the value is 12.
- Order
-
Defines the maximum allowed order along the U (and V) directions for
each curve segment and surface patch. This maximum order value ranges from
5 to 16 included, in a given direction.
By default,
the value is 12.
Auto Detection
- Coordinates
-
Defines whether the point coordinates are displayed as the pointer moves
along the geometry.
By default,
this option is cleared.
- Search Dressing
-
Defines whether the control points on geometry detected with the pointer
are displayed when using the Snap on Cpt (snap on control points)
option from the Dashboard.
By default,
this option is selected.
Display
- Control Points
-
Defines whether the control points are displayed on the geometry. See FreeStyle Shape Design User's Guide: Displaying Furtive Elements
Temporarily).
By default,
this option is cleared.
- Continuity
-
Defines whether the continuities are displayed at every connection between
elements (such as blend and match curves and surfaces, fill surfaces, and
so forth).
By default,
this option is selected.
- Curvature
-
Defines whether the curvature texts are displayed on an element (such
as blend and match curves and surfaces, and so forth).
By default,
this option is cleared.
- Order
-
Defines whether the order number is displayed along the U (for curves)
or U and V directions (for surfaces).
By default,
this option is selected.
- Contact Point
-
Defines whether the contact point is displayed at every connection between
connected elements (such as blend and match curves and surfaces, and so
forth).
By default,
this option is selected.
- Tension
-
Defines whether the tension manipulators are displayed oat every connection
between connecting elements (such as blend and match curves and surfaces,
and so forth).
By default,
this option is cleared.
Tuning
- Coefficient
-
Defines the coefficient value used when manipulating views or geometry.
By default,
the value is 0.2. You can input values within a range of [1e-5 ; 1.0 ].
- Rotation Step
-
Defines the rotation step value used when manipulating views or geometry.
By default,
the value is 1.000.
Note:
You can see the attenuation factor values corresponding to the
coefficient value set in the tuning settings.
Selection Options
- Full Cross
-
Defines whether a full cross is displayed
.
By default,
this option is not selected.
- All Mesh
-
Defines whether all control points of the mesh are selected while editing
a curve or surface
.
By default,
this option is not selected.
- Filter Options: Deselect all points
- Defines whether all the selected control points of the
selected elements are deselected when the Filters mode
is changed in the Control Points dialog box.
By default, this option is not selected.
Matching Constraint Command Options
Defines options for the Matching
Constraint command:
- Default activation status
-
Defines whether constraints are deactivated during the Matching
Constraint command creation. Use the Default activation status option to apply this setting.
When a constraint is deactivated, it is not updated when its inputs (source
or target) is modified outside the Matching Constraint command.
By default,
this option is not selected.
- Minimum corner distance
-
Defines the relimitation manipulator that is used to move the constraint
to snap directly at to the corner of the selected face when it gets closer
than the value defined
.
By default,
this option is not selected and the minimal value is 0.001mm.
- Mean surface solver
-
Defines the result between multiple constraints surface as a mean surface
between each constraint result. If a surface is modified by two constraints,
the results for the two constraints are computed separately. The final result
is a mean surface between those two intermediate results.
By default,
this option is cleared.
- Automatic target selection
Defines the distance around the source element for automatic target selection when using the Matching Constraint command. Use the Automatic target selection option to apply this setting.
By default,
this option is selected and
the value is set to 10mm.
Mirror Analysis Options
Defines the mirror display options during Mirror
Analysis command.
- Feedback color
Defines the default color in which the mirrored elements and
analysis are displayed when Display mirror tags is active in the Mirror Analysis dialog box.
By default, the color is gray as shown in the screen
capture.
Parallel Command
- Warn when cancelling the Parallel Command Session
- Displays a warning message when cancelling a parallel command session.
- Enable insertion of current running command into a Parallel Command Session
- Inserts a current running command launched according to a standard mode into a parallel command session in parallel with another command by launching another command able to run in parallel.
Mapping Analysis Option
Defines the material display options during Surfacic Curvature Analysis, Draft Analysis, Environment Mapping Analysis and Isophotes Mapping
Analysis commands.
- No warning message if material mode is not ON
If Material in is unselected, when you start any of the analyses listed above an error message is displayed.
To avoid seeing this error message, select the No warning message if material mode is not ON check box; the material mode will be automatically selected during the analyses and then automatically unselected afterwards.
Soft Mirror
Defines the symmetry plane for the Soft Mirror (Ctrl+F8) command.
- Symmetry Plane
Defines the plane with respect to which a mirror image of your shapes is created when you click Soft Mirror (Ctrl+F8) or when you press Ctrl+F8.
The following options are available:
- XY Plane
- YZ Plane
- ZX Plane
- User Defined Plane.
By default, the plane selected is ZX Plane.
Curve Analysis Result
Select the check box if you want to keep the intersection curves as NURBs. If you clear the check box, the intersection curves are kept as parameterized curve.
By default, this option is cleared.
Control Points Border 3D Curve Mode
Select the Border 3D Curve mode check box to create a separate 3D NURBs curve from a surface edge which is selected as an input element for the Control Points command.
By default, this option is cleared.
Control Points Diffusion/Cross Diffusion Law
Clear the Delay Law Application check box to apply diffusion and cross diffusion laws immediately on several selected control points previously modified.
By default, this option is cleared.