Tolerancing | |
| |
Annotation Set Creation
- Standard
- Defines the conventional standard dedicated to 3D Tolerancing & Annotation.
The options in the Standard appear as follows:
- ANSI-ASME
- ANSI-ASME standard for 3D.
- ISO
- ISO standard for 3D.
- JIS
- JIS standard for 3D.
By default,
ISO standard
is selected. Based on the selected conventional standard, customized tolerances (ISO, ANSI-ASME, or JIS) appear in the General Tolerance list in the Limit of Size Definition dialog box.
- Annotation Set ratio
- Defines the default ratio that is applied to created annotation views. By default, the ratio is:
- 1:100 for Small range
- 1:1 for Normal range
- 100:1 for Large range
Ratio Assistant
- Privilege ratios
- Lets you add the ratios to be displayed in the
Suggested ratio list.
Based on the selected range, the predefined ratios appear.
You can enter the ratio in the box and click
to add it in the list. To remove the
existing ratio value, you can select the value from the list and click
.Note: The added values should be in the limits defined for the selected range.- Small range: between 1:1 to 1:10000
- Normal range: between 100:1 to 1:1 and 1:1 to 1:100
- Large range: between 10000:1 to 1:1
- Extra-large range: between 1000000:1 to 100:1
By default, The Normal
Range is selected and the ratio is 1:1. In the Limit of Size Definition dialog box, the customized tolerances (ISO, ANSI-ASME, or JIS) appear in the General Tolerance list as per selected conventional standard.
Library of Tolerancing Schemas for User Features
- Name
- Defines the library name that contains tolerancing schemas for user features.
Generative Tolerancing
- Parameters
- Click the Parameters button to access the generative tolerancing ISO and ASME parameters.
- ISO
-
- Options parameters: Lets you select the sets
of parameters for the tolerancing feature to be used when you
generate tolerances with ISO standard.
- Entire
- Simple
By default, Entire is
selected. - Default values parameters: Lets you select
the tolerance values to be used when you generate tolerances with
ISO standard based on the representation type selected.
- Intermediate quality: Generates the tolerance values with intermediate precision
- High quality: Generates the tolerance values with high precision
- Rough quality: Generates the tolerance values with low precision
By default, Intermediate
quality is selected.
Note: Click Browse Resource Sheet
to
open the corresponding resource .xlsx sheet. - Options parameters: Lets you select the sets
of parameters for the tolerancing feature to be used when you
generate tolerances with ISO standard.
- ASME
-
- Options parameters: Lets you select the set
of parameters for the tolerancing feature to be used when you
generate tolerances with ASME standard.
- Entire
- Simple
By default, Entire is
selected. - Default values parameters: Lets you select
the tolerance values to be used when you generate tolerances with
ASME standard based on the representation type selected.
- Intermediate quality: Generates the tolerance values with intermediate precision
- High quality: Generates the tolerance values with high precision
- Rough quality: Generates the tolerance values with low precision
By default, Intermediate
quality is selected.
Note: Click Browse Resource Sheet to
open the corresponding resource sheet in the .xlsx sheet. - Options parameters: Lets you select the set
of parameters for the tolerancing feature to be used when you
generate tolerances with ASME standard.
Semantic Control
- Always try to create semantic tolerances and dimensions
- Determines whether the application always tries to specify a semantic type
for annotations during creation.
Important: Applies to annotations that can be semantic. The annotation display can be modified and moved according to the standard semantic. By default, this check box is selected.- Always try to create semantic general tolerances on dimensions
- Defines whether the application always tries to set as semantic
a general tolerances dimension during its creation. Applicable
on dimension which can be semantic.
Warning: Only applies when Always try to create semantic tolerances and dimensions is selected.
By default, this check box is cleared.
- Non-semantic tolerance creation allowed
- Defines whether non-semantic tolerances creation is permitted. By default, this check box is selected.
- Non-semantic dimension creation allowed
- Defines whether non-semantic dimensions creation is permitted. By default, this check box is selected.
By default,
Free is selected.
Leader Associativity To the Geometry
- Free
- Defines that leader annotations are freely positioned relative to their geometrical elements.
- Perpendicular
- Defines that leader annotations are positioned perpendicular to their geometrical elements.
Published Geometry
- Create assembly annotation on external published geometry only
- Defines whether assembly annotations are created only on external published
geometry.
Important: When this option is selected, the Forbidden cursor
is displayed when passing over
non-published geometries. By default, this check box is cleared.
Note Object Attribute
- Allow Note Object Attribute creation
- Lets you create the Note Object Attributes (NOAs) with dittos or details. By default, this check box is cleared.
- Isolate the Ditto/Detail
- Removes the reference dittos or details of the NOAs.
- This check box is available only if the Allow Note Object
Attribute creation check box is selected. By default, this check box is cleared.