Work On Support | |
| |
Global
Allows you to define specific preferences for normal and large range parts.
Work On Support
- Work On Support (Default values at creation)
-
- Define the first direction scale (H for horizontal), by setting
Primary spacing and
Graduations values.
By default, this option is set to 100mm for primary
spacing and 10.
- You can also define another scale for the second direction
scale (V for vertical), thus allowing distortions of the grid.
Select the Allow distortions option to activate the Primary spacing and Graduations fields of the second direction.
By default, this option is cleared. For further information, refer to Working with a Support.
- Define the first direction scale (H for horizontal), by setting
Primary spacing and
Graduations values.
Work On Support 3D
Select the desired option:
- Grids definition
- Define the default values for the grids, by defining
Labels names and
Primary Spacing values for each direction.
By default, the Labels are set to X, Y, and Z for the
first, second and third directions, and the Primary Spacing is set to 100mm for
all directions.
- Grids customization
-
- Define the
Grid labels unit, that is the coefficient
of division for all straight lines units.
For example, the grid label unit is set to 1 and the X label for one line is set to 500. If you modify the grid label unit to 10, the X label will be 50.
By default, this option is set to 1.
- Define the
Automatic Scale Factor, that is the scale
to be used when the grid becomes too small. The factor is comprised between 2
to 10.
By default, this option is set to 5.
- Define the
Maximum lines number to be displayed on
the screen, from 70 up to 500 lines.
By default, option is set to 70.
All these values will be used as the default values when creating a support.
For further information, refer to Working With a 3D Support.
- Define the
Grid labels unit, that is the coefficient
of division for all straight lines units.