Dimensions
- Dimensions for which last update failed
- Select a color for the dimensions for which the last update failed.
 By default, this option is selected and the color is specified
to pink.
- Non associative dimensions (on 3D)
- Select a color for dimensions that are not associative to 3D geometry.
By default, this option is selected and the color is specified
to gray.
- Isolated dimensions
- Select a color for dimensions that are not linked to any geometry.
By default, this option is selected and the color is specified to dark blue.
- Dimensions converted to graphical elements
- Select a color for dimensions that have been converted to graphical elements.
By default, this option is selected and the color is specified
to dark green.
- Fake dimensions
- Select a color for fake dimensions.
By default, this option is selected and
the color is specified to brown.
- Dimensions driving 2D geometry
- Select a color for the dimensions driving the 2D geometry.
By default, this
option is selected and the color is specified to blue.
- True dimensions
- Select a color for true length dimensions.
By default, this option is selected
and the color is specified to violet.
- Clipped dimensions
- Select a color for clipped dimensions.
By default, this option is selected and
the color is specified to dark yellow.
Callouts
- Callouts for which last update failed
- Select a color for callouts for which the last update failed.
By default, this
option is selected and the color is specified to dark pink.
- Isolated callouts
- Select a color for callouts that are not linked to any view.
By default, this
option is selected and the color is specified to dark blue.
- Callouts for non-perpendicular view
- Select a color for callouts for which the active view is not perpendicular to the
reference.
By default, this option is selected and the color is
specified to light green.
Patterns
- Contour thickness for zones with a size lower than the pitch
- Select a thickness that is used to point out the pattern area, when the size of this area
is lower than the pitch (so that no hatch or dot can be displayed).
By default, this option is selected and the thickness is
specified to index 5.
|