Geometry to be imported
All selected ICEM DB element types are saved in the Part. The
geometry is converted into the following Part element types:
ICEM DB
| CATPart
|
---|
Point | Datum Point |
Raw Data | Datum Wire of Lines Datum Point Cloud |
Curves | Datum Curves |
Scans | Datum Mesh Datum Point Cloud |
Surfaces | Datum Surface |
Faces | Datum Surface |
Curves Composite | Curve Join Datum Wire Datum Curves |
Shells | Surface Join Datum Shell Datum Surfaces |
Work Planes | Plane Axis System |
Continuity Optimization of Edge Curves and Independent Curves
You can choose between different tolerance settings to optimize
the continuity in case of C2 discontinuities on independent curves or
2D edges.
- No Optimatization
- Curves are split at non C2 continuity points. The geometry of the curve remains unchanged.
- Automatic Optimatization
- Curves are approximated at non C2 continuity points with the default tolerance.
- Tolerance
- Curves are approximated at non C2 continuity points with the specified tolerance.
Attributes to be imported
You can import the following attributes from an ICEM DB:
- Colors
- Layers
- Lists
Lists are converted to Display Sets.
- Selection Sets
- Lights
- Materials
Materials individually assigned to an element can be imported
together with texture data. Click the Texture Paths button to
open the Texture Paths dialog box where you can add and remove
texture paths.
Note:
The import of material and texture data is only supported with
ICEM DB files version 4.12 and higher. You can select the ICEM DB version in the
Additional Export Options area.
- Texts
Texts are imported as text with leader (annotation).
- Views
Views are imported as cameras.
Note:
The data exchange supports both parallel and central perspective
views.
View layouts (multiple views) and zoom factor are not imported.
Additional Options
The following additional options are available:
- Skip Root node of the ICEM DB for import
- Try to use 2D curves for import of C2 continuous trimmed surfaces
- Import planar surface as plane if possible
Geometry to be exported
All selected Part element types are saved in the ICEM DB. The
geometry is converted into the following ICEM DB element types:
CATPart
| ICEM DB
|
---|
Point | Point |
Curve | Curve |
Surface | Face |
Point Cloud | Raw Data |
Mesh | Scan |
Surface Join | Shell |
Curve Join | Curve Composite |
Axis System | Work Plane |
Planes | Work Plane |
Attributes to be exported
You can import the following attributes to an ICEM DB:
- Colors
- Layers
- Selection Sets
- Display Sets
Display Sets are converted to Lists.
- Lights
- Materials
Materials can be exported together with texture data. Click
the Texture Path button to open the file browser for selecting a
texture path where the texture images shall be exported. The path is displayed in the
text field. If the text field is empty, no texture data are exported.
Note:
The
export of material and texture data is only supported with ICEM DB files version 4.12
and higher. You can select the ICEM DB version in the Additional Export
Options area.
- Text with Leader
- Views
Cameras are exported to views.
Note:
The data exchange supports both parallel and central perspective
views.
Multiple views and zoom factor are not exported.
Additional Export Options
- ICEM DB Version 4.12 | 4.11
- You can select the ICEM DB
version for the export.
- Materials and textures can only be exported to ICEM DB version
4.12. If 4.11 is selected, the Materials check box and
Texture Path button in the Attributes to be exported
area are disabled and no material will be exported.
- Export Hidden Elements
- Also elements in Hidden mode are exported into the ICEM DB.
- Crop underlying Surface
- Underlying surfaces can be cropped at face boundaries.
Note:
In the following cases the underlying surfaces will unconditionally be retracted to the face boundaries:- unlimited geometry
- if the underlying surface is smaller than the face.
- Write empty Nodes to Rms File
- You can export an active and saved 3DEXPERIENCE product including product structure and underlying 3D Shape representation into an ICEM Surf Reference Manager session file (*.rms). The rms file consists of nodes and parent nodes which reflect the database structure. The 3D Shape representation of a product is mentioned in the rms file as reference structure consisting of the saved ICEM DB and the node belonging to it. For each 3D Shape representation, an ICEM DB is written into a directory with the same name as the rms file.
- With this option, you can choose whether products or nodes without 3D Shape representation in the product or node and underlying product or node shall be mentioned in the rms file.