Curvature Improvement - Internal Control Point Maximum Deformation
Select the desired option:
- User Defined Value
- Allows you to modify the tolerance value of the deformation of internal control points for curvature improvement.
- Model Relative Value
- Uses default value between the V6 resolution value and the projection point tolerance value to deform inner control points for curvature improvement.
Surface and Curve Sub-elements
- Keep V4 Segmentation
- Reduces the geometry data size for the simplification.
Migration of DETAILS spaces used by dittos
- Usual Optimized Mode
- only the "reference" solids are taken into account,
- they are Copied As Result With Link (CARWL),
- they keep the same place as the DITTOS', with the same scale,
- this link is associative: if you modify the "reference" body in the no show space, the ones of the CARWL are also modified.
- the DITTOS' geometry is not created for each DITTO; it is stored as a reference in the geometrical set (in no show).
- Like V4 Explode Mode
- Same behavior as usual and wireframe modes, but the "reference" bodies are not copied as result with link, but paste as specified in part document.
- there is no associativity with the reference.
- Both Usual and Wireframe Mode
-
- Same behavior as Usual Optimized Mode, but in this case, the "reference" geometry is copied as result in an OpenBody under each DITTO. It has the same scale as the DITTO'd geometry.
- there is no associativity between the "reference" geometry and the DITTO's.
Isolated Solids Mock-up migration
Select the desired option:
- as CGR
- Converts isolated solids mock-up into 3DEXPERIENCE as CGR to get only the meshing view.
- as PartBody
- Converts isolated solids mock-up into 3DEXPERIENCE as PartBody to view, and edit the geometry of the solid
and obtain exact solid.
3D Text Migration
- Keep 3D Text
- Migrates V4 3D texts into 3DEXPERIENCE annotations, when they are associated to features.