-
From the Reconstruction section of the action bar, click Position the 3D .
- On the reconstructed 3D model, select a point.
-
Click one of the orthogonal axes and one of the following elements:
- A point
- A plane (symmetry plane or planar constraint)
The axe rotates along the alignment of the selected element.
-
Repeat Step 2 with another axis.
- Optional: To align the position of the model along the reference axis, click Set as Origin in the validation panel.
-
Click OK.
Note:
If an axis has already been defined, it appears after Step1.
If Step 5 is not performed, the position of the model is not modified. Only the axis is repositioned.
|