Drawing 2D Geometry

In this step, you will use the sketching commands to draw the object contour.

Click Play to watch the video:

  1. From the Reconstruction section of the action bar, click Edge Snapping .
  2. Click the first and second point to snap the curve to an edge and press Enter to validate the creation of the curve.
  3. From the Reconstruction section of the action bar, click Manual Control Points .
  4. Click the second point, and then click along the object to the third point to define the path of the curve.
  5. Press Enter to validate the creation of the curve.
  6. Use the sketching commands to complete the contour on imageA.
  7. Repeat the operations to draw the contour on imageB.

Next step: Defining Points of View.