Configuring the Associative Export Options

You can specify the port number and root directory that will be used by the SIMULIA Abaqus/CAE Associative Interface for CATIA. In addition, you can specify the Abaqus/CAE version to be used.

See Also
Using Manual Associative Export and Import

You configure the associative export options by selecting Share > Export > Associative Export > Associative Export Preferences from the top bar. The Abaqus/CAE Export Options dialog box that appears allows you to specify the port number, the export directory, and the version of Abaqus/CAE being used.

Port Number
When you enable associative import from CATIA to Abaqus/CAE, a port provides the connection between the two applications. By default, Abaqus/CAE assigns a port number, and CATIA uses the same number. Alternatively, you can specify the port number in both Abaqus/CAE and CATIA. The port number must be the same in each application.
Export Directory
The export directory contains all of the files created by CATIA before they are exported to Abaqus/CAE. When you use manual associative export to write a file from CATIA, the file is stored in this directory.
Abaqus/CAE Version
By default, the apps on the 3DEXPERIENCE platform export geometry to the latest released version of CATIA V5, which may not be supported by the version of Abaqus/CAE you use. You can ensure that the geometry is exported to the appropriate CATIA version by specifying your installed version of Abaqus/CAE.