Solving Constraints Errors While Aligning Clouds

You can use the method described below when the alignment with constraints cannot be computed.

  1. Run an alignment with constraints.
    If this alignment cannot be computed, an information message is displayed (Update error). You can:
    • Delete constraints.
    • Delete and add other constraints.
    • Check the consistency of the constraints.
    • Eventually, re-compute the basic shapes used.
    Note: If constraints are deleted, the intermediate computation is erased.
  2. Exit the command.
  3. Restart the alignment with one single constraint. Click Apply.
  4. If the computation is still impossible, restart the alignment with another constraint.
  5. If the computation is possible, add another constraint and repeat the process from the Apply above in loops until the result is satisfactory.