To customize some visual components, click
Visualization Options from the
Fluid Design section of the
action bar.
The
Visualization Options dialog box displays to let
you change the size and the color of these components with the available
options.
3D Manipulator Tab
The 3D Manipulator area in the Visualization
Options dialog box allows you to change the size and the color of
the 3D Manipulator with the following options:
| Option |
Description |
| Basic Scale
|
Lets you specify the size of the 3D manipulator by defining a
multiplication factor of the profile size of the route. Enter
a multiplication factor between 1.01 and 1.45. The
Basic Scale must be at least 0.05
inferior to the value of the Highlight
Scale |
| Highlight Scale
|
Lets you specify the size of the active manipulator by defining a
multiplication factor of the profile size of the route. Enter
a multiplication factor between 1.06 and 1.5. The
Highlight Scale value must be at
least 0.05 superior to the Basic
Scale value.
|
| Straight Length Scale
|
Lets you specify the length of the Length and Orient manipulators by
defining a multiplication factor of the profile size of the
route |
| Primary Ghost Color
|
Lets you edit the color of the 3D manipulator. |
| Replace Ghost Color
|
Lets you edit the color of the 3D manipulator that indicates the
Replace Mode is active. |
| Modify Ghost Color
|
Lets you edit the color of the 3D manipulator that indicates the
Modify Mode is active. |
| Dashed Lines Color
|
Lets you edit the color of the six dashed lines. |