Content of the Report
The report uses the standard agreements of the listing method in BVBS.
The Rebar BVBS Export is available for two-dimensional reinforcement (BF2D) and three-dimensional reinforcement (BF3D).
Header Block
The Header Block (H) provides standard information independent of the geometry.
| H Parameter | Header-Block Description | BF2D | BF3D | Comment |
|---|---|---|---|---|
| j | Project number | | | Name of the 3Dshape |
| r | Drawing number | | | Not fulfilled by the current function |
| i | Index | | | Not fulfilled by the current function |
| p | Reinforcement / area code | | | Geometrical set number |
| l | Rod / net length [mm] | | | |
| n | Quantity | | | |
| e | Weight per net / bar [kg] | | | |
| d | Bar diameter | | | Diameter of the rebar |
| g | Steel quality | | | Value of the Steel grade attribute set |
| s | Bend mandrel [mm] | | | Radius of the bend mandrel |
| v | Designer | | | Not fulfilled by the current function |
| a | Low | | Not fulfilled by the current function | |
| t | Length difference for stepped rod lengths | | Not fulfilled by the current function |
Geometry Block
The Geometry Block (G) provides information on the shape of reinforcing bars.
| G Parameter | Geometry block description | BF2D | BF3D |
|---|---|---|---|
| l | Leg length | | |
| r | Radius of the curved element | | |
| w | Angle of the next bend | | |
| x | X coordinates for 3D reinforcement. | | |
| y | Y coordinates for 3D reinforcement. | | |
| z | Z coordinates for 3D reinforcement. | |