Relimiting Bars

You can relimit bars to fit the shape of the concrete part. Relimiting bars involves extending or shortening their length, as well as select an existing surface to extrapolate or split the bars at the extremity.

Before you begin: Create a rebar.
See Also
About Handling Extremities
  1. In the Rebar Creation dialog box, click the Extremities tab.
  2. Select the Relimitation check box.
  3. According the result your envision, select either:
    • With Length , and enter a value to extend (length > 0) the selected bars or shorten (length <0) the selected bars.
    • From selection, and select an existing surface extrapolate or split the bars on the chosen extremity. Covering can be managed with this mode enabled.
  4. Optional: To remove the relimitation, clear the Relimitation check box.
  5. Click OK and Apply.

The bars are extended or shortened on the extremities accordingly.