Install OnePart only

Installing OnePart only is significantly faster than performing a full installation of both OnePart and Exalead CloudView. Follow the procedure below for these scenarios (Only recommended for advanced users):

  1. Scenario 1: You previously installed Exalead CloudView R2022x, and now want to install OnePart for the first time.
  2. Scenario 2: You previously installed OnePart and Exalead CloudView R2022x together, but now want to re-install OnePart only.

Before you begin: ONLY perform these steps with an existing installation of Exalead CloudView 2022x. Make sure that you have run the setup wizard or postinstall tool for your Exalead CloudView instance.
  1. Note down the paths for your Exalead CloudView's data directory and installation directory.
  2. Get the OnePart software files. If you already have done so go to Install OnePart only.
    1. Download the OnePart installation kit or copy it from the DVD to your Windows Server.
    2. Double-click onepart-2022x.xxx-windows-x64.exe to run OnePart’s Setup wizard.
    3. Select Unzip Only to only extract the OnePart software files, for example, to C:\OnePart.
  3. Open the command line as Administrator.
    • Right-click the cmd.exe and select Run as administrator.
  4. Go to the installation directory folder and run the command:

    Note: This installation process will stop and restart the Exalead CloudView service.

    • install.bat -install <CLOUDVIEW_INSTALLDIR> -data <DATADIR> -instance <INSTANCENAME> -nocloudview
    • Example, for scenario 1:

      install.bat -install c:\cloudview\cloudview-V6Ronepart-2022xxx.xxxx-windows-x64.exe.xxx -data c:\cloudview\datadir -instance cvdefault -nocloudview

    • Example, for scenario 2:

      install.bat -install c:\OnePart\software\cloudview -installdir -data c:\OnePart\datadir -instance onepart -nocloudview

    Note: These examples assume you installed Exalead CloudView as a service. If not, include the -noservice option.

  5. You will be prompted to verify the installation parameters.

You're now ready to set up OnePart.