ABQ_AM_MaterialDeposition_Bead

This parameter table type is used in special-purpose techniques for additive manufacturing.

This page discusses:

See Also
Special-Purpose Techniques for Additive Manufacturing

ProductsAbaqus/Standard

You must include a parameter table of type "ABQ_AM_MaterialDeposition_Bead" in the table collection that you specify to activate elements in the step if the deposition process type is "Bead".

Parameter Table Type Definition

PARAMETER TABLE TYPE, NAME="ABQ_AM_MaterialDeposition_Bead", PARAMETERS=5
 STRING, , "Stack Direction", , "X|Y|Z",
 FLOAT, , "Bead Height", , ,
 FLOAT, , "Bead Width", , ,
 FLOAT, , "Activation Offset", , ,
 STRING, , "Deposition Position", , "Below|Middle|Above",

Parameters

Stack Direction
Direction of progressive material deposition layers. Options are "X", "Y", and "Z" indicating the global xg-, yg-, or zg-direction.
Bead Height
Height (measured parallel to the stack direction) of the deposited bead of material.
Activation Offset
Unused. Should be set to zero.
Deposition Position
Set to "Above", "Middle", or "Below" to indicate that the deposited material bead is situated above, through, or below the path in the stack direction.