ABQ_EChemPET_Electrode_Particle_ButlerVolmer

PARAMETER TABLE TYPE, NAME="ABQ_EChemPET_Electrode_Particle_ButlerVolmer", PARAMETERS=8
  FLOAT, , "$k_c$", , ,
  FLOAT, , "$k_a$", , ,
  FLOAT, , "${\alpha }_c$", , ,
  FLOAT, , "${\alpha }_a$", , ,
  FLOAT, , "$C_e^{\mathrm{ref}}$", , ,
  FLOAT, , "$R_{\mathrm{SEI}}$", , ,
  FLOAT, , "${\mathrm{Stress}}_{\mathrm{coef}}$", , ,
  FLOAT, , "$a_s$", , ,
 

$k_c$

Cathodic rate constant.

$k_a$

Anodic rate constant.

${\alpha }_c$

Cathodic transfer coefficient.

${\alpha }_a$

Anodic transfer coefficient.

$C_e^{\mathrm{ref}}$

Reference value of the lithium concentration in the electrolyte.

$R_{\mathrm{SEI}}$

Resistance value of the solid electrolyte interphase (SEI) layer.

${\mathrm{Stress}}_{\mathrm{coef}}$

Partial molar volume coefficient for the hydrostatic stress at the particle surface.

$a_s$

Set this value to 0.0 to use the value computed by Abaqus. If you specify a nonzero value, the specified value is used for the wetted surface area of the particle.