ABQ_EChemPET_Electrode_Particle_Layers

This parameter table type is used in modeling the electrochemical process in a battery to specify the material layer name and the weight fraction for the layer.

This page discusses:

You must include a parameter table of type "ABQ_EChemPET_Electrode_Particle_Layers" in the material definition to specify the material layer name and the weight fraction for the layer. The layer name must be unique and is used in the labels of subsequent layer-specific material definitions.

 

See Also
Coupled Thermal-Electrochemical Analysis

Parameter Table Type Definition

PARAMETER TABLE TYPE, NAME="ABQ_EChemPET_Electrode_Particle_Layers", PARAMETERS=2
 STRING, " ", "Layer Name", , , 
 FLOAT, , "Weight Fraction of Layer", , ,

Parameters

Layer Name
Unique name to identify the material region of the particle layer.
Weight Fraction of Layer
Set to 1.0 if only one layer is present in the particle. If multiple layers are present, set between 0.0 and 1.0, depending on the weight ratio of each layer to the total weight of the particle.