AXIAL

ProductsAbaqus/StandardAbaqus/Explicit

Description

The AXIAL connection does not constrain any component of relative motion. The distance between nodes a and b is

l = ∥ x_{b} - x_{a} ∥ .

The available component of relative motion, $u_{1}$ , acts along the line connecting the two nodes, measures the change in distance separating the two nodes, and is defined as

u_{1} = l - l_{0},

where $l_{0}$ is the initial distance from node a to b. The connector constitutive displacement is

u_{1}^{m a t} = l - l_{1}^{r e f} .

The kinetic force is

f_{a x i a l} = f_{1} q, where q = \frac{1}{∥ x_{b} - x_{a} ∥} (x_{b} - x_{a}) .

In Abaqus/Standard an optional orientation can be provided at one of the nodes in an AXIAL connection to provide direction for the force if the nodes are coincident or when one of the nodes is a “ground node.” If the orientation is provided at both of the coincident nodes, the orientation at the first node in the connectivity will be used. The orientation definitions remain fixed during the analysis and will be ignored when the two nodes separate. Rotational degrees of freedom are not activated for connection type AXIAL.

Summary


AXIAL
Basic, assembled, or complex:	Basic
Kinematic constraints:	None
Constraint force output:	None
Available components:	$u_{1}$
Kinetic force output:	$f_{1}$
Orientation at a:	Optional
Orientation at b:	Optional
Connector stops:	$l_{1}^{m i n} \leq l \leq l_{1}^{m a x}$
Constitutive reference lengths:	$l_{1}^{r e f}$
Predefined friction parameters:	None
Contact force for predefined friction:	None