Two-Dimensional Gasket Element Library

This section provides a reference to the two-dimensional gasket elements available in Abaqus/Standard.

This page discusses:

 

See Also
About Gasket Elements
Choosing a Gasket Element
*GASKET SECTION

Element Types

Link Elements

GK2D2

2-node, two-dimensional gasket element

GK2D2N

2-node, two-dimensional gasket element with thickness-direction behavior only

Active Degrees of Freedom

1 for gasket elements with thickness-direction behavior only.

1, 2 for other gasket elements.

Additional Solution Variables

None.

General Elements

GKPS4

4-node, plane stress gasket element

GKPE4

4-node, plane strain gasket element

GKPS4N

4-node, two-dimensional gasket element with thickness-direction behavior only

GKPS6

6-node, plane stress gasket element

GKPE6

6-node, plane strain gasket element

GKPS6N

6-node, two-dimensional gasket element with thickness-direction behavior only

Active Degrees of Freedom

1 for gasket elements with thickness-direction behavior only.

1, 2 for other gasket elements.

Additional Solution Variables

None.

Nodal Coordinates Required

X , Y

Element Property Definition

You must define the element's cross-sectional area (for link elements) or out-of-plane width (for general elements), initial gap, and initial void.

You can specify the thickness direction as part of the gasket section definition or by specifying a normal direction at the nodes; you can specify the element thickness as part of the gasket section definition. Otherwise, Abaqus/Standard will calculate the thickness direction. For link elements the thickness direction is the direction from the first to the second node and the thickness is the distance between the nodes. For general elements the thickness direction is based on the midsurface of the element and the thicknesses at the integration points are based on the nodal positions. See Defining the Gasket Element's Initial Geometry for more details.

Element-Based Loading

None.

Element Output

GK2D2 Elements

S11

Pressure or thickness-direction force in the gasket element.

CS11

Contact pressure in the gasket element (only available if S11 is the force in the gasket element and the gasket response is not defined using a material model).

S12

Shear stress or shear force.

E11

Gasket closure if the gasket response is defined directly using a gasket behavior model; strain if the gasket response is defined using a material model.

E12

Shear motion if the gasket response is defined directly using a gasket behavior model; strain if the gasket response is defined using a material model.

NE11

Effective thickness-direction strain in the gasket element.

NE12

Effective shear strain in the gasket element.

GK2D2N Elements

S11

Pressure or thickness-direction force in the gasket element.

CS11

Contact pressure in the gasket element (only available if S11 is the force in the gasket element and the gasket response is not defined using a material model).

E11

Gasket closure if the gasket response is defined directly using a gasket behavior model; strain if the gasket response is defined using a material model.

NE11

Effective thickness-direction strain in the gasket element.

General Elements with Thickness-Direction Behavior Only

S11

Pressure in the gasket element.

E11

Gasket closure if the gasket response is defined directly using a gasket behavior model; strain if the gasket response is defined using a material model.

NE11

Effective thickness-direction strain in the gasket element.

Other General Elements

S11

Pressure in the gasket element.

S22

Direct membrane stress.

S33

Direct membrane stress (only available for plane strain elements).

S12

Shear stress.

E11

Gasket closure if the gasket response is defined directly using a gasket behavior model; strain if the gasket response is defined using a material model.

E22

Direct membrane strain.

E33

Direct membrane strain (only available for plane strain elements).

E12

Shear motion if the gasket response is defined directly using a gasket behavior model; strain if the gasket response is defined using a material model.

NE11

Effective thickness-direction strain in the gasket element.

NE22

Direct membrane strain.

NE33

Direct membrane strain (only available for plane strain elements).

NE12

Effective shear strain.

Node Ordering and Integration Point Numbering

Link Elements



 

General Elements