*DETONATION POINT

Define detonation points for a JWL explosive equation of state.

This option is used to define detonation points for a JWL explosive equation of state. It is required when the EOS, TYPE=JWL option is used. The DETONATION POINT option should appear immediately after the EOS option.

This page discusses:

There are no parameters associated with this option.

 

Data lines to define detonation points

First line

  1. Coordinate 1 of detonation point.

  2. Coordinate 2 of detonation point.

  3. Coordinate 3 of detonation point.

  4. Detonation delay time (total time, as defined in Conventions). The default is 0.

Repeat this data line as often as necessary to define each detonation point.

 

See Also
*EOS
Equation of State