Required parameters
- NAME
-
Set this parameter equal to a label that will be used to refer to the
distribution table.
Data line
to specify the distribution table label for shell or membrane thickness, beam
radius for a circular cross-section beam, or initial contact
clearance- First (and only)
line
-
LENGTH.
Data line
to specify the distribution table label for shell offset
- First (and only) line
-
RATIO.
Data
lines to specify the distribution table labels for shell
stiffness- First
line
-
SHELLSTIFF1.
-
SHELLSTIFF1.
-
SHELLSTIFF1.
-
SHELLSTIFF1.
-
SHELLSTIFF1.
-
SHELLSTIFF1.
-
SHELLSTIFF2.
- Second line
-
SHELLSTIFF2.
-
SHELLSTIFF2.
-
SHELLSTIFF3.
-
SHELLSTIFF2.
-
SHELLSTIFF2.
-
SHELLSTIFF2.
-
SHELLSTIFF3.
-
SHELLSTIFF3.
- Third line
-
SHELLSTIFF2.
-
SHELLSTIFF2.
-
SHELLSTIFF2.
-
SHELLSTIFF3.
-
SHELLSTIFF3.
-
SHELLSTIFF3.
Data line
to specify the distribution table labels for the coordinates of points
a and b used to define a local
coordinate system- First (and
only ) line
-
COORD3D.
-
COORD3D.
Data line
to specify the distribution table label for an additional rotation angle used
to define a local coordinate system
- First (and only) line
-
-
ANGLE.
Data line
to specify the distribution table labels for isotropic
elasticity- First (and only)
line
-
MODULUS.
-
RATIO.
Data
lines to specify the distribution table labels for orthotropic
elasticity- First
line
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
- Second line
-
MODULUS.
-
MODULUS.
Data
lines to specify the distribution table labels for orthotropic elasticity with
engineering constants- First
line
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
RATIO.
-
RATIO.
-
RATIO.
-
MODULUS.
- Second line
-
MODULUS.
-
MODULUS.
Data line
to specify the distribution table labels for orthotropic elasticity in plane
stress- First (and only)
line
-
MODULUS.
-
MODULUS.
-
RATIO.
-
MODULUS.
-
MODULUS.
-
MODULUS.
Data
lines to specify the distribution table labels for anisotropic
elasticity- First
line
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
- Second line
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
- Third line
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
-
MODULUS.
Data
line to specify the distribution table label for mass density
- First (and only) line
-
DENSITY.
Data
line to specify the distribution table label for isotropic thermal
expansion- First (and only)
line
-
EXPANSION.
Data
line to specify the distribution table labels for orthotropic thermal
expansion- First (and only)
line
-
EXPANSION.
-
EXPANSION.
-
EXPANSION.
Data
line to specify the distribution table labels for anisotropic thermal
expansion- First (and only)
line
-
EXPANSION.
-
EXPANSION.
-
EXPANSION.
-
EXPANSION.
-
EXPANSION.
-
EXPANSION.
Data line to specify the distribution table labels for the
second-order orientation tensor
- First (and only) line
-
-
ORITENS.
Data line to specify the distribution table labels for a scale
factor and a quantity related to the scale factor derivatives for one of the
following material attributes: mass, stiffness, or design
stress
- First (and only)
line
-
-
RATIO.
-
RATIO.
Data line to specify the distribution table labels for a scale
factor for material thermal conductivity
- First (and only) line
-
-
RATIO.
Data line to specify the distribution table labels for adjusting
(displacing) nodal coordinates
- First (and only) line
-
-
DISP3D.
Data line to specify the distribution table labels for local material
directions
- First (and only) line
-
DIR3D.
|