*INCREMENTATION OUTPUT

Optional parameters

VARIABLE

Set VARIABLE=ALL to indicate that all incrementation variables applicable to this procedure type should be written to the output database.

Set VARIABLE=PRESELECT to indicate that the default incrementation output variables for the current procedure type should be written to the output database. Additional output variables can be requested on the data lines.

If this parameter is omitted, the incrementation variables requested for output must be specified on the data lines.

Data lines to request incrementation output

First line

Give the identifying keys for the variables to be written to the output database. The keys are defined in Abaqus/Explicit Output Variable Identifiers.

Repeat this data line as often as necessary to define the time incrementation variables to be written to the output database.