*UNIAXIAL

Characterize fabric materials through loading and unloading test data.

This option is used to indicate the start of shear or uniaxial test data along a particular direction to define the behavior of a fabric material. It must be used in conjunction with the FABRIC option.

This page discusses:

Required parameters

COMPONENT

Set COMPONENT=1 to define uniaxial behavior of fabric fibers in the “fill” direction.

Set COMPONENT=2 to define uniaxial behavior of fabric fibers in the “warp” direction.

Set COMPONENT=SHEAR to define shear response of the fabric.

There are no data lines associated with this option.

 

 

See Also
Fabric Material Behavior
*FABRIC
*LOADING DATA
*UNLOADING DATA