ABQ_PHASE_TRANS_MeltingTemperature

You use this parameter table type to specify a melting temperature range for modeling material physical raw-liquid-solid (RLS) state transition.

This page discusses:

See Also
Modeling Metallurgical Phase Transformations

Products Abaqus/Standard

You must include a parameter table of type "ABQ_PHASE_TRANS_MeltingTemperature" in the material definition to specify a melting temperature range for modeling material physical raw-liquid-solid (RLS) state transition. Only one set of data can be defined.

Parameter Table Type Definition

, NAME="ABQ_PHASE_TRANS_MeltingTemperature", PARAMETERS=2
 FLOAT, , "Solidus Temperature", , ,
 FLOAT, , "Liquidus Temperature", , ,

Parameters

Solidus Temperature
Temperature below which the material is fully solid.
Liquidus Temperature
Temperature above which the material is fully liquid.