ABQ_PHASE_TRANS_Martensitic_TTT_Diagram

You use this property table type to specify the starting and ending curves of the time-temperature-transformation (TTT) diagram for a martensitic transformation.

This page discusses:

You must include a property table of type "ABQ_PHASE_TRANS_Martensitic_TTT_Diagram" in the material definition to specify the starting and ending curves of the time-temperature-transformation (TTT) diagram for a martensitic transformation whose input option is set to TTT in the parameter table of type "ABQ_PHASE_TRANS_Transformations".

The property table must have a unique label of "ABQ_PHASE_TRANS_Trans_NameOfTransformation_TTT_Diagram", where NameOfTransformation is the name of the transformation defined in the parameter table of type "ABQ_PHASE_TRANS_Transformations".

 

See Also
Modeling Metallurgical Phase Transformations

Property Table Type Definition

PROPERTY TABLE TYPE, NAME="ABQ_PHASE_TRANS_Diffusional_TTT_Diagram", PROPERTIES=2
 "Start Temperature"
 "End Temperature"

Properties

Start Temperature
Temperature at the start of the transformation, M s .
End Temperature
Temperature at the end of the transformation, M f .