The output variables listed below are available in Abaqus/Standard.
- ENDEN
- Field: yes History: no .fil: no .dat: no
Element energy density, including plastic dissipation and creep dissipation
if present.
- ENDENERI
- Field: yes History: no .fil: no .dat: no
Element energy density error indicator, including plastic dissipation error
and creep dissipation error if present.
- MISESAVG
- Field: yes History: no .fil: no .dat: no
Element average Mises equivalent stress.
- MISESERI
- Field: yes History: no .fil: no .dat: no
Element Mises equivalent stress error indicator.
- PEEQAVG
- Field: yes History: no .fil: no .dat: no
Element average equivalent plastic strain.
- PEEQERI
- Field: yes History: no .fil: no .dat: no
Element equivalent plastic strain error indicator.
- PEAVG
- Field: yes History: no .fil: no .dat: no
Element average plastic strain.
- PEERI
- Field: yes History: no .fil: no .dat: no
Element plastic strain error indicator.
- CEAVG
- Field: yes History: no .fil: no .dat: no
Element average creep strain.
- CEERI
- Field: yes History: no .fil: no .dat: no
Element creep strain error indicator.
- HFLAVG
- Field: yes History: no .fil: no .dat: no
Element average heat flux.
- HFLERI
- Field: yes History: no .fil: no .dat: no
Element heat flux error indicator.
- EFLAVG
- Field: yes History: no .fil: no .dat: no
Element average electric flux.
- EFLERI
- Field: yes History: no .fil: no .dat: no
Element electric flux error indicator.
- EPGAVG
- Field: yes History: no .fil: no .dat: no
Element average electric potential gradient.
- EPGERI
- Field: yes History: no .fil: no .dat: no
Element electric potential gradient error indicator.