Requesting Procedure-Specific Preselected Output Requests
You can activate a procedure-specific set of commonly requested output variables. See Table 1 for a list of procedure types and their accompanying preselected variables. The variables written to the output database may change if the procedure type changes between steps.
Procedure type | Preselected element variables (field) | Preselected nodal and surface variables (field) | Preselected energy variables (history) |
---|---|---|---|
Annealing | none | none | none |
Complex frequency extraction | none | U | none |
Coupled pore fluid diffusion/stress | S, E, VOIDR, SAT, POR | U, RF, CF, PFL, PFLA, PTL, PTLA, TPFL, TPTL | ALLAE, ALLCCDW, ALLCCE, ALLCCEN, ALLCCET, ALLCCSD, ALLCCSDN, ALLCCSDT, ALLCD, ALLFD, ALLIE, ALLKE, ALLPD, ALLSE, ALLVD, ALLDMD, ALLWK, ALLKL, ALLQB, ALLEE, ALLJD, ALLSD, ETOTAL |
Coupled thermal-electric | HFL, EPG, GRADT | NT, RFL, EPOT | ALLAE, ALLCCDW, ALLCCE, ALLCCEN, ALLCCET, ALLCCSD, ALLCCSDN, ALLCCSDT, ALLCD, ALLFD, ALLIE, ALLKE, ALLPD, ALLSE, ALLVD, ALLDMD, ALLWK, ALLKL, ALLQB, ALLEE, ALLJD, ALLSD, ETOTAL |
Direct cyclic | S, E, PE, PEEQ, PEMAG | U, RF, CF | ALLAE, ALLCCDW, ALLCCE, ALLCCEN, ALLCCET, ALLCCSD, ALLCCSDN, ALLCCSDT, ALLCD, ALLFD, ALLIE, ALLKE, ALLPD, ALLSE, ALLVD, ALLDMD, ALLWK, ALLKL, ALLQB, ALLEE, ALLJD, ALLSD, ETOTAL |
Direct-integration implicit dynamic (with an output frequency of 10) | S, E, PE, PEEQ, PEMAG | U, V, A, RF, CF, CSTRESS, CDISP | ALLAE, ALLCCDW, ALLCCE, ALLCCEN, ALLCCET, ALLCCSD, ALLCCSDN, ALLCCSDT, ALLCD, ALLFD, ALLIE, ALLKE, ALLPD, ALLSE, ALLVD, ALLDMD, ALLWK, ALLKL, ALLQB, ALLEE, ALLJD, ALLSD, ETOTAL |
Direct-solution steady-state dynamic | S, E | U, V, A, RF, CF | ALLKE, ALLSE, ALLVD, ALLWK |
Eigenfrequency extraction | none | U | none |
Eigenvalue buckling prediction | none | U | none |
Explicit dynamic | S, LE, PE, PEEQ, EVF, SVAVG, PEVAVG, PEEQVAVG | U, V, A, RF, CSTRESS | ALLKE, ALLSE, ALLWK, ALLPD, ALLCD, ALLVD, ALLDMD, ALLAE, ALLIE, ALLFD, ETOTAL |
Fatigue crack growth | S, E | U, RF, CSTRESS | ALLAE, ALLCCDW, ALLCCE, ALLCCEN, ALLCCET, ALLCCSD, ALLCCSDN, ALLCCSDT, ALLCD, ALLFD, ALLIE, ALLKE, ALLPD, ALLSE, ALLVD, ALLDMD, ALLWK, ALLKL, ALLQB, ALLEE, ALLJD, ALLSD, ETOTAL |
Fully coupled thermal-electrical-structural in Abaqus/Standard | S, E, PE, PEEQ, PEMAG, HFL, EPG, GRADT | U, RF, CF, NT, RFL, CSTRESS, CDISP, EPOT | ALLAE, ALLCCDW, ALLCCE, ALLCCEN, ALLCCET, ALLCCSD, ALLCCSDN, ALLCCSDT, ALLCD, ALLFD, ALLIE, ALLKE, ALLPD, ALLSE, ALLVD, ALLDMD, ALLWK, ALLKL, ALLQB, ALLEE, ALLJD, ALLSD, ETOTAL |
Fully coupled thermal-stress in Abaqus/Standard | S, E, PE, PEEQ, PEMAG, HFL, GRADT | U, RF, CF, NT, RFL, CSTRESS, CDISP | ALLAE, ALLCCDW, ALLCCE, ALLCCEN, ALLCCET, ALLCCSD, ALLCCSDN, ALLCCSDT, ALLCD, ALLFD, ALLIE, ALLKE, ALLPD, ALLSE, ALLVD, ALLDMD, ALLWK, ALLKL, ALLQB, ALLEE, ALLJD, ALLSD, ETOTAL |
Fully coupled thermal-stress in Abaqus/Explicit | S, LE, PE, PEEQ, HFL | U, V, A, RF, CSTRESS, NT, RFL | ALLKE, ALLSE, ALLWK, ALLPD, ALLCD, ALLVD, ALLDMD, ALLAE, ALLIE, ALLFD, ALLIHE, ALLHF, ETOTAL |
Geostatic stress field | S, E, POR, SAT, VOIDR | U, RF, CF, CSTRESS, CDISP | ALLAE, ALLCCDW, ALLCCE, ALLCCEN, ALLCCET, ALLCCSD, ALLCCSDN, ALLCCSDT, ALLCD, ALLFD, ALLIE, ALLKE, ALLPD, ALLSE, ALLVD, ALLDMD, ALLWK, ALLKL, ALLQB, ALLEE, ALLJD, ALLSD, ETOTAL |
Heat transfer | HFL, GRADT | NT, RFL | none |
Linear static perturbation | S, E | U, RF, CF | ALLAE, ALLCCDW, ALLCCE, ALLCCEN, ALLCCET, ALLCCSD, ALLCCSDN, ALLCCSDT, ALLCD, ALLFD, ALLIE, ALLKE, ALLPD, ALLSE, ALLVD, ALLDMD, ALLWK, ALLKL, ALLQB, ALLEE, ALLJD, ALLSD, ETOTAL |
Mass diffusion | CONC, MFL | NNC, RFL | none |
Modal dynamic (with an output frequency of 10) | S, E | U, V, A, RF, CF | ALLAE, ALLCD, ALLFD, ALLIE, ALLKE, ALLPD, ALLSE, ALLVD, ALLDMD, ALLWK, ALLKL, ALLQB, ALLEE, ALLJD, ALLSD, ETOTAL |
SIM-based modal dynamic | none | none | none |
Quasi-static | S, E, PE, PEEQ, PEMAG, CE, CEEQ, CEMAG | U, RF, CF, CSTRESS, CDISP | ALLAE, ALLCCDW, ALLCCE, ALLCCEN, ALLCCET, ALLCCSD, ALLCCSDN, ALLCCSDT, ALLCD, ALLFD, ALLIE, ALLKE, ALLPD, ALLSE, ALLVD, ALLDMD, ALLWK, ALLKL, ALLQB, ALLEE, ALLJD, ALLSD, ETOTAL |
Random response | S, E | U, V, A | none |
Response spectrum | S, E | U, RF, CF | ALLKE, ALLSE, ALLWK |
Static | S, E, PE, PEEQ, PEMAG | U, RF, CF, CSTRESS, CDISP | ALLAE, ALLCCDW, ALLCCE, ALLCCEN, ALLCCET, ALLCCSD, ALLCCSDN, ALLCCSDT, ALLCD, ALLFD, ALLIE, ALLKE, ALLPD, ALLSE, ALLVD, ALLDMD, ALLWK, ALLKL, ALLQB, ALLEE, ALLJD, ALLSD, ETOTAL |
Steady-state dynamic | S, E | U, V, A, RF, CF | ALLKE, ALLSE, ALLWK |
SIM-based steady-state dynamic | none | none | none |
Steady-state transport | S, E | U, RF, CF, CSTRESS, CDISP | ALLAE, ALLCCDW, ALLCCE, ALLCCEN, ALLCCET, ALLCCSD, ALLCCSDN, ALLCCSDT, ALLCD, ALLFD, ALLIE, ALLKE, ALLPD, ALLSE, ALLVD, ALLDMD, ALLWK, ALLKL, ALLQB, ALLEE, ALLJD, ALLSD, ETOTAL |
Subspace-based steady-state dynamic | S, E | U, V, A, RF, CF | ALLKE, ALLSE, ALLVD, ALLWK |
If you request preselected field or history output and request additional output variables using individual output requests for specific variable types, the variables requested will be appended to the variables contained in the preselected list.
For geometrically nonlinear analysis in Abaqus/Standard, E is not available for output and LE is output by default. For linear perturbation analyses and geometrically linear analyses in Abaqus/Standard, LE and NE strain output requests yield the same output as E. For geometrically linear analysis in Abaqus/Explicit, LE is output.
Abaqus may omit some preselected variables from the analysis results. Abaqus omits preselected output variables if they are not applicable for the element type used to mesh the model or if other factors make the variables unsuitable for the analysis.