Selecting the Radiation Output Variables
The radiation output variables that can be written to the output database are listed in Cavity Radiation Variables.
The output request can be repeated as often as necessary to define output for different variables, different cavities, different element sets, different surfaces, etc. Selecting the Radiation Output VariablesThe radiation output variables that can be written to the output database are listed in Cavity Radiation Variables. Selecting the Region of the Model for Which Radiation Output Is RequiredYou can specify the cavity, element set, or surface for which radiation output is required. Each radiation output request can apply to only one type of region. If you do not specify a region of the model, radiation variables are output for all the cavities in the model. Controlling the Output FrequencyThe frequency of radiation output is controlled as described in Controlling the Frequency of Output to the Output Database. Requesting OutputYou can request all radiation variables applicable to the current procedure. In this case any additional variables you specify are ignored. | ||||||