Nodal Variables

You can request nodal variable output to the results or output database file.

Fluid Cavity Variables

The output variables listed below are available in Abaqus/Explicit.

COORD

.fil: yes .odb Field: yes .odb History: yes

Coordinates of the node. These are the current coordinates if the large-displacement formulation is being used.

COORn

.fil: no .odb Field: no .odb History: yes

Coordinate n ( $n = 1, 2, 3$ ).

U

.fil: yes .odb Field: yes .odb History: yes

Displacement components.

Results file and field-type output: both translation and rotation.

History-type output: translation only. Rotation results should be requested by components.

UT

.fil: no .odb Field: yes .odb History: yes

Translational displacement components.

UMAG

.fil: no .odb Field: no .odb History: yes

Magnitude of translational displacements.

UR

.fil: no .odb Field: yes .odb History: yes

Rotational displacement components.

Un

.fil: no .odb Field: no .odb History: yes

$u_{n}$ displacement component ( $n = 1, 2, 3$ ).

URn

.fil: no .odb Field: no .odb History: yes

$ϕ_{n}$ rotation component ( $n = 1, 2, 3$ ).

V

.fil: yes .odb Field: yes .odb History: yes

Velocity components (both translation and rotation).

Results file and field-type output: both translation and rotation.

History-type output: translation only. Rotation results should be requested by components.

VT

.fil: no .odb Field: yes .odb History: yes

Translational velocity components.

VMAG

.fil: no .odb Field: no .odb History: yes

Magnitude of translational velocities.

VR

.fil: no .odb Field: yes .odb History: yes

Rotational velocity components.

Vn

.fil: no .odb Field: no .odb History: yes

${\dot{u}}_{n}$ velocity component ( $n = 1, 2, 3$ ).

VRn

.fil: no .odb Field: no .odb History: yes

${\dot{ϕ}}_{n}$ rotational velocity component ( $n = 1, 2, 3$ ).

A

.fil: yes .odb Field: yes .odb History: yes

Acceleration components (both translation and rotation).

Results file and field-type output: both translation and rotation.

History-type output: translation only. Rotation results should be requested by components.

AT

.fil: no .odb Field: yes .odb History: yes

Translational acceleration components.

AMAG

.fil: no .odb Field: no .odb History: yes

Magnitude of translational accelerations.

AR

.fil: no .odb Field: yes .odb History: yes

Rotational acceleration components.

An

.fil: no .odb Field: no .odb History: yes

${\ddot{u}}_{n}$ acceleration component ( $n = 1, 2, 3$ ).

ARn

.fil: no .odb Field: no .odb History: yes

${\ddot{ϕ}}_{1}$ rotational acceleration component ( $n = 1, 2, 3$ ).

POR

.fil: yes .odb Field: yes .odb History: yes

Acoustic pressure at a node.

PABS

.fil: yes .odb Field: yes .odb History: yes

Acoustic absolute pressure at a node.

NT

.fil: yes .odb Field: yes .odb History: yes

All temperature values at a node. Available only for coupled thermal-stress analysis.

NTn

.fil: no .odb Field: no .odb History: yes

Temperature degree of freedom n at a node ( $n = 11$ ). Available only for coupled thermal-stress analysis.

RF

.fil: yes .odb Field: yes .odb History: yes

Reaction force and moment components.

Results file and field-type output: both translation and rotation.

History-type output: translation only. Rotation results should be requested by components.

RT

.fil: no .odb Field: yes .odb History: yes

Reaction force components.

RFMAG

.fil: no .odb Field: no .odb History: yes

Magnitude of reaction forces.

RM

.fil: no .odb Field: yes .odb History: yes

Reaction moment components.

RFn

.fil: no .odb Field: no .odb History: yes

Reaction force component n ( $n = 1, 2, 3$ ) (conjugate to prescribed displacement $u_{n}$ ).

RFL

.fil: yes .odb Field: yes .odb History: yes

All reaction flux values. Available only for coupled thermal-stress analysis.

RFLn

.fil: no .odb Field: yes .odb History: yes

Reaction flux value n at a node ( $n = 11$ ). Available only for coupled thermal-stress analysis.

RMn

.fil: no .odb Field: no .odb History: yes

Reaction moment component n ( $n = 1, 2, 3$ ) (conjugate to prescribed rotation $ϕ_{n}$ ).

CF

.fil: no .odb Field: yes .odb History: yes

All components of point loads and concentrated moments.

CFn

.fil: no .odb Field: no .odb History: yes

Point load component n ( $n = 1, 2, 3$ ).

CMn

.fil: no .odb Field: no .odb History: yes

Point moment component n ( $n = 1, 2, 3$ ).

NVF

.fil: no .odb Field: yes .odb History: no

Nodal volume fraction.

STRAINFREE

.fil: no .odb Field: yes .odb History: no

Strain-free adjustments to initial positions (adjusted position minus unadjusted position). Only written to the output database (.odb) file for the original field output frame at zero time.

TIEDSTATUS

.fil: no .odb Field: yes .odb History: no

Status of the tied secondary nodes (the status of a secondary node is 2 if the secondary node is not tied, 1 if the secondary node is tied, and 0 for nodes that do not participate in a tie constraint).

TIEADJUST

.fil: no .odb Field: yes .odb History: no

Position adjustment vector components of the tied secondary nodes. Only written to the output database (.odb) file for the original field output frame at zero time.

PRELV

.fil: no .odb Field: yes .odb History: no

Discrete particle relative velocity with respect to the fluid (available for Abaqus/Standard to Abaqus/Explicit co-simulation.)

Fluid Cavity Variables

PCAV: .fil: yes .odb Field: no .odb History: yes
Fluid cavity gauge pressure.
CVOL: .fil: yes .odb Field: no .odb History: yes
Fluid cavity volume.
CTEMP: .fil: no .odb Field: no .odb History: yes
Fluid cavity temperature for an ideal gas model used under adiabatic conditions.
CSAREA: .fil: no .odb Field: no .odb History: yes
Fluid cavity surface area.
CLAREA: .fil: no .odb Field: no .odb History: yes
Fluid cavity unblocked leakage area.
CBLARAT: .fil: no .odb Field: no .odb History: yes
Ratio of the blocked leakage area to the unblocked leakage area.
CMASS: .fil: no .odb Field: no .odb History: yes
Mass of the fluid contained in a fluid cavity.
APCAV: .fil: no .odb Field: no .odb History: yes
Average gauge pressures for multiple fluid cavities.
TCVOL: .fil: no .odb Field: no .odb History: yes
Total volume of multiple fluid cavities.
ACTEMP: .fil: no .odb Field: no .odb History: yes
Average fluid cavity temperature for an ideal gas model used under adiabatic conditions for multiple fluid cavities.
TCSAREA: .fil: no .odb Field: no .odb History: yes
Total surface area of multiple fluid cavities.
TCMASS: .fil: no .odb Field: no .odb History: yes
Total mass of the fluid contained in the multiple fluid cavities.
CMF: .fil: no .odb Field: no .odb History: yes
Molecular mass fraction of fluid species contained in a fluid cavity.
CMFL: .fil: no .odb Field: no .odb History: yes
Mass flow rate out of a fluid cavity.
CMFLT: .fil: no .odb Field: no .odb History: yes
Accumulated mass flow out of a fluid cavity.
CEFL: .fil: no .odb Field: no .odb History: yes
Heat energy flow rate out of a fluid cavity.
CEFLT: .fil: no .odb Field: no .odb History: yes
Accumulated heat energy flow out of a fluid cavity.
MINFL: .fil: no .odb Field: no .odb History: yes
Inflator mass flow rate into a fluid cavity.
MINFLT: .fil: no .odb Field: no .odb History: yes
Accumulated inflator mass flow into a fluid cavity.
TINFL: .fil: no .odb Field: no .odb History: yes
Inflator temperature.