The output variables listed below are available in
Abaqus/Standard.
- ELEDEN
- .dat: no
.fil: no .odb Field: yes .odb History: no
All energy density components. A limited number of them are available for
direct-solution steady-state dynamic and subspace-based steady-state dynamic
analyses. Mode-based steady-state dynamic analyses support computation of
kinetic and strain energy densities as well as the density of the energy loss
due to viscous and structural damping. In frequency extraction analyses, the
values of energy densities in the element are normalized. Normalization is
performed for each eigenmode separately, such that the kinetic and strain
energies for the whole model add up to one.
- EKEDEN
- .dat: no
.fil: no .odb Field: yes .odb History: yes
Kinetic energy density in the element. In steady-state dynamic and frequency
extraction analyses, this is the cyclic mean value. In mode-based and
direct-solution steady-state dynamic analyses and in frequency extraction
analyses, only field output in the output database is supported for this
variable. In frequency extraction analyses, the value of kinetic energy density
in the element is normalized. Normalization is performed for each eigenmode
separately, such that the kinetic and strain energies for the whole model add
up to one.
- EKEDENA
- .dat: no
.fil: no .odb Field: yes .odb History: no
Kinetic energy density amplitude in the element. This variable is available
only in mode-based and direct-solution steady-state dynamics analyses.
- EKEDENP
- .dat: no
.fil: no .odb Field: yes .odb History: no
Kinetic energy density peak value in the element. This variable is
available only in mode-based and direct-solution steady-state dynamic analyses.
- ESEDEN
- .dat: no
.fil: no .odb Field: yes .odb History: yes
Total elastic strain energy density in the element. When the Mullins effect
is modeled with hyperelastic materials, this quantity represents only the
recoverable part of the energy density in the element. In steady-state dynamic
and frequency extraction analyses, this is the cyclic mean value. In mode-based
and direct-solution steady-state dynamic analyses and in frequency extraction
analyses, only field output in the output database is supported for this
variable. In frequency extraction analyses, the value of total elastic strain
energy density in the element is normalized. Normalization is performed for
each eigenmode separately, such that the kinetic and strain energies for the
whole model add up to one.
- ESEDENA
- .dat: no
.fil: no .odb Field: yes .odb History: no
Total elastic strain energy density amplitude in the element. This variable
is available only in mode-based and direct-solution steady-state dynamic
analyses.
- ESEDENP
- .dat: no
.fil: no .odb Field: yes .odb History: no
Total elastic strain energy density peak value in the element. This
variable is available only in mode-based and direct-solution steady-state
dynamic analyses.
- EPDDEN
- .dat: no
.fil: no .odb Field: yes .odb History: yes
Total energy dissipated per unit volume in the element by rate-independent
and rate-dependent plastic deformation. Not available for steady-state dynamic
analysis.
- ECDDEN
- .dat: no
.fil: no .odb Field: yes .odb History: yes
Total energy dissipated per unit volume in the element by creep, swelling,
and viscoelasticity. Not available for steady-state dynamic analysis.
- EVDDEN
- .dat: no
.fil: no .odb Field: yes .odb History: yes
Total energy dissipated per unit volume in the element by viscous effects,
not inclusive of energy dissipated through static stabilization or
viscoelasticity. In mode-based and direct-solution steady-state dynamic
analyses, only field output in the output database is supported for this
variable.
- EVDDENE
- .dat: no
.fil: no .odb Field: yes .odb History: no
Total energy dissipated per unit volume in the element by viscous effects
due to the material damping. This variable is available only in mode-based and
direct-solution steady-state dynamic analyses.
- EVDDENG
- .dat: no
.fil: no .odb Field: yes .odb History: no
Total energy dissipated per unit volume in the element by viscous effects
due to the global damping. This variable is available only in mode-based and
direct-solution steady-state dynamic analyses.
- EHDDEN
- .dat: no
.fil: no .odb Field: yes .odb History: no
Total energy dissipated per unit volume in the element due to structural
damping. This variable includes energy loss due to the material and global
structural damping and is available only in mode-based and direct-solution
steady-state dynamic analyses.
- EHDDENE
- .dat: no
.fil: no .odb Field: yes .odb History: no
Total energy dissipated per unit volume in the element due to the material
structural damping. This variable is available only in mode-based and
direct-solution steady-state dynamic analyses.
- EHDDENG
- .dat: no
.fil: no .odb Field: yes .odb History: no
Total energy dissipated per unit volume in the element due to the global
structural damping. This variable is available only in mode-based and
direct-solution steady-state dynamic analyses.
- ESDDEN
- .dat: no
.fil: no .odb Field: yes .odb History: yes
Total energy dissipated per unit volume in the element resulting from static
stabilization. Not available for steady-state dynamic analysis.
- ECTEDEN
- .dat: no
.fil: no .odb Field: yes .odb History: yes
Total electrostatic energy density in the element. Not available for
steady-state dynamic analysis.
- EASEDEN
- .dat: no
.fil: no .odb Field: yes .odb History: yes
Total “artificial” strain energy density in the element (energy associated
with constraints used to remove singular modes, such as hourglass control, and
with constraints used to make the drill rotation follow the in-plane rotation
of the shell element). Not available for steady-state dynamic analysis.
- EDMDDEN
- .dat: no
.fil: no .odb Field: yes .odb History: yes
Total energy dissipated per unit volume in the element by damage. Not
available for steady-state dynamic analysis.