Inserting an Existing Sketch

You can insert an existing sketch from another model to be part of the current sketch.

Context:

You must have a sketch activated when inserting a sketch. The inserted sketch becomes part of the current active sketch. When you select a model to insert into the sketch, all the available Ordered Geometrical Sets and sketches within the chosen model appear in the dialog box menus. If the selected model does not have a sketch or Ordered Geometrical Set, "Model has no sketches" displays.

Note: When updating standard cutouts and electrical hardware, be sure the app library is up to date, see Update Content Library.

  1. Open a new or existing sketch.
  2. From the Sketch section of the action bar, click Insert Sketch .
  3. In the Insert Sketch dialog box, click Choose component.
    The 3DSearch widget opens.
  4. From the search results, select the model with the sketch you want to insert and click OK.
  5. In the Sketch Sets menu, select the Ordered Geometrical Set containing the sketch to insert.
  6. In the Sketches menu, select the sketch to insert.

    Many Ordered Geometrical Sets contain one sketch. If multiple sketches are available in the Ordered Geometrical Set, you can select only one sketch at a time.

  7. Click Start Insert.
    A preview of the sketch in displayed in the work area. Click Cancel Insert if you decide not to insert the displayed sketch.
  8. Click in the work area where you want the inserted sketch to appear.

    If the sketch you are inserting has a point located at the sketch origin, you can snap the inserted sketch to an entity and create a coincident constraint.

  9. Optional: If you want to insert additional sketches from the current model, repeat steps 5 through 8. Click Choose component again to insert a sketch from another model.
  10. Click when finish inserting sketches.