Creating End Cuts

EndCut lets you create end cuts of the stiffener to maintain the connectivity.

  1. In the EndCut panel, select the required stiffener in the Profile box.

    You can select multiple stiffeners.

    The name of the profile, extremities of the stiffener, limit type, and section of the selected stiffener are displayed in the dialog box.
  2. Select the rows to define end cuts, and click Define/Edit EndCut .
  3. In the Define Feature and Parameters dialog box, define the end cut:
    1. From the Limit Type list, select the required delimitation type.
    2. From the Type list, select the required end cut type.
    3. From the Name list, select the required end cut reference.
    4. Click Apply.
    The end cut parameters are defined and applied.
  4. Click OK in the Define Feature and Parameters dialog box.
    The end cuts are created. The defined end cut and endcut type are displayed in the EndCut panel.

 

See Also
More help on this topic