-
Do any of the following:
- In the Structure Fastener panel, select the required
fastener rows and click Break Structure Fastener
 .
- Click Break Structure Fastener
from the Operation section of the action bar
and select the required fasteners from the 3D area or the
tree.
The selected fasteners appear in the Unified Bead
Fastener box.
-
In the Object box, select a splitting element.
- You can select only one splitting element. You can select a plane, surface, or
curve.
- The splitting element must intersect with the fastener curve.
- You can create a splitting element on the fly using the various commands from the
toolbox. The toolbox appears when you click the Object box.
Before creating an element, you need to specify a destination for it, using the
Destination
 command from the toolbox.
- Optional:
Click Chain Mode
to turn on the chain mode.
This mode lets you perform the splitting operation continuously. The resultant
fasteners of the first break operation are automatically set as an input for the next. The
generated fasteners are saved automatically after each break operation.
-
Click Break
.
The fasteners are broken using the selected splitting element. Each fastener is
broken into two fasteners.
|