Creating a Plate

Plate lets you create a plate by specifying the limits.

  1. Under Material & Orientation,
    1. Select the required material from the list.
    2. Specify the thickness.
    3. Optional: Click to invert the material orientation.
    4. Select the required thickness offset option.
  2. Under Category & Name, select the required category for the plate from the Category list.
  3. Select a required support in the work area.

    You can select a reference plane or a surface. You can also select a structural object (panel, plate, or profile); the supporting reference plane of that object will be selected as a support.

    Important: The selection must be compatible with the selected category. You can select multiple elements.

  4. Optional: Specify the required offset value for the support.

    • The offset value is applicable for planar supports only.
    • If you want to have a common offset value for multiple supports, ensure that the Common support offset check box is selected.

  5. Under Limits,
    1. Select one of the following Limit Detail options: Coarse, Intermediate, or Fine.
    2. Select the limiting elements.

      You can select geometrical entities, structural objects, a volume or a closed surface, and particular faces of the stiffeners.

    3. Optional: In the Normal Offset, specify the offset value normal to the limit.
    4. Optional: In the Offset column, specify the offset value along the support.
    5. Optional: Click to get the correct orientation.
    6. Optional: In the Limit Type list, select the limit type.

      The default limit type appears as per the selected limit.

  6. Click OK.