-
In the
Applied on box, select a panel or a plate to
create the opening on.
-
Click
Create Standard Opening
 .
The
Standard Opening dialog box appears.
-
In the
Category list, select the opening type.
-
Under
Positioning strategy, select the required
positioning mode.
-
Depending on the selected positioning mode, specify the necessary
inputs.
-
Under
Contour, select the opening type and then the
corresponding opening.
- Optional:
Under
Attributes,
-
From the
Support list, select the support face to
position the opening contour.
-
In the
Direction box, select a line or a plane to
define the direction in which the opening contour is projected on the plate or
panel.
-
Select the required forming mode.
-
From the
Extrusion list, select the extrusion type:
UpToLast or
Limit1/Limit2.
The extrusion must intersect the support of the plate/split
plate.
-
Click
OK.
|
