Parent Child Relationship between Objects

The parent children graph provides essential information about how the object is linked to others objects. It can be used to navigate through existing relationships and to repair broken links.

To check the parents and children of a structural object or a feature, right-click the feature and select Parent/Children.

The following table describes the Structure Functional Design relationships:

Object/Feature Mode Parents Children
Section Section Simplified Contour List of stiffeners/members using the section
Panel Support (DMS type)
  • Plate
  • Connection object of the slot using this panel as penetrated object
Canonical Molded Support Plane or Surface
  • Delimited Molded Support.
  • Delimited Molded Surface of basic panel using the CMS of current plate as a limit.
  • Delimited Tace of super stiffeners and super beams using CMS of a plate as limit.
Delimited Molded Support
  • Canonical Molded Support
  • List of limits of type StrMoldedSurfaceLimit
  • Basic opening object
  • Canonical Trace of super stiffeners and super beams using plate for creation.
  • Openings using the plate as reference
  • Basic plate using DMS like a seam.
  • Basic panel object
Plate
  • Panel
  • Seam - Splitting objects
None
StrMoldedSurfaceLimit Canonical Molded Surface(CMS) or Plane or Surface used as limit Delimited Molded Surface.
StrTraceLimit Canonical Trace or Plane or Delimited Molded Surface used as limit Delimited Trace.
Stiffener
  • Basic panel object
  • Delimited Molded Trace
  • Section
  • Openings which are in the SldOpeningPlateProfileSet
Connection object of the endcut and slot
Delimited Trace Support
  • Canonical Trace
  • Start Limit Of Type StrTraceLimit
  • End Limit Of Type StrTraceLimit
  • Basic stiffener/member object
  • Canonical Trace of super stiffeners and super beams using this member/ stiffener for creation.
Canonical Trace Support Modes
Stiffener Mode
  • Delimited Molded Support
  • Support
  • Delimited Trace of stiffener
  • Super stiffeners/stiffeners on free edge limited by this stiffener
Stiffener on Curve Mode
  • Delimited Molded Support
  • Curve lying on molded surface
  • Delimited Trace of stiffener
  • Super stiffeners/SFEs limited by this stiffener
Stiffener on Free Edge Mode
  • Delimited Molded Support
  • Limit (if Limit is used)
  • Opening (if Opening is used)
  • Extract (if Extract is used)
  • Delimited Trace of stiffener
  • Super stiffeners/SFEs limited by this stiffener
Member Pt - pt Mode
  • Point 1
  • Point 2
Delimited Trace of member
Member Pt length Mode
  • Point
  • Direction
Delimited Trace of member
Member Pt Limit Mode
  • Point
  • Direction
  • Limit
Delimited Trace of member
Member Reference Plane Mode
  • Transversal Plane
  • Longitudinal Plane
Delimited Trace of member
Member Curve Mode
  • Curve
  • Guide Surface (if Used)
Delimited Trace of member
2 Members- Plane Mode
  • Plane
  • Member trace 1
  • Member trace 2
Delimited Trace of member

Basic Member Object

(regular cases)

  • Section
  • Delimited Trace Support
Connection object of the endcut and slot
Basic Slot Object
  • Secondary object
  • Primary objects
None
Basic Opening Object
Sketch Mode
  • Support (DMS type) (If applied to a plate; if applied to a stiffener/member only the sketch/positioned contour is shown)
  • Sketch
  • Direction plane
Canonical Trace of a stiffener on free edge using the opening edges as support
Standard Mode
  • Support (DMS type)
  • Opening Positioned Contour
  • Direction plane
Canonical Trace of a stiffener on free edge using the opening edges as support
3d Object Mode
  • Support (DMS type)
  • 3D Object used to perforate
Canonical Trace of a stiffener on free edge using the opening edges as support
Opening Positioned Contour
Offset/Offset
  • Support (DMS type)
  • Reference 1
  • Reference 2
  • Axis angle (optional)
Child: basic opening object
Half Height/Offset
  • Support (DMS type)
  • U-reference (surface or DMS type)
  • Axis angle (optional)
Basic opening object
Mid Distance/Offset
  • Support (DMS type)
  • U-reference 1 (surface or DMS type)
  • U-reference 2 (surface or DMS type)
  • V-reference 3 (surface or DMS type)
  • Axis angle (optional)
Child: basic opening object
Mid Dist/Mid Dist
  • Support (DMS type)
  • U-reference 1 (surface or DMS type)
  • U-reference 2 (surface or DMS type)
  • V-reference 3 (surface or DMS type)
  • V-reference 4 (surface or DMS type)
  • Axis angle (optional)
Basic opening object
Half Height/Mid Dist
  • Support (DMS type)
  • U-reference 1 (surface or DMS type)
  • U-reference 2 (surface or DMS type)
  • Axis angle (optional)
Basic opening object
Basic Endcut Object Profile object None
User Structure Connection
  • Reference element
  • Intersecting element
None