About Accessing the Reference Plane Browser

The reference plane browser lets you select the reference planes for creating structure objects.

See Also
About Using Reference Planes Browser

The table below lists the various commands in which the reference plane browser is available:

Command Toolbox containing the command, accessible from
Panel
  • The Support box
  • The Limits Toolbox area
Plate
  • The Support box
  • The Limits Toolbox area
Parametric Plate The Support box

(Only for Multi Limits positioning mode)

Stiffener
  • The Support box
  • The Limits area
Stiffener on Free Edge The Limits area
Member - Point Length
  • The Direction box
  • The Limits area
Member - Point Limit
  • The Limit box
  • The Direction box
  • The Limits area
Member - Point to Point The Limits area
Member - Curve The Limits area
Member - Reference Supports
  • The 1st Support and the 2nd Support boxes
  • The Limits area
Seam The Splitting Object box
Break Profile The Splitting Object box
Advanced Copy Translation mode
  • The Source box
  • The Destination box
Symmetry mode The Plane box
Opening on Panel and Plate The reference boxes (only for the Standard method)
Opening on Profile The References area (only for the Standard method)
Flange The Limits area