Using Structure Resources Manager

You can load the structure resources specified in Data Setup, in the active session. The loaded resources ensure faster performance of the commands that use them.

You can also specify and load new resources that are not already specified in Data Setup.

  1. From the Operation section of the action bar, click Structure Resources Manager .
    The Structure Resources Manager panel lists the resources available in the Structure Resources table in Data Setup. The color icons under the Resource column help you know the status of the resources:
    Color Description
    The physical resource is either specified in Data Setup or set manually using the Structure Resources Manager command, but it is not loaded using this command.
    The physical resource is loaded using the Structure Resources Manager command.
    - The physical resource is neither specified in Data Setup, nor set manually using this command.
    Physical_Resource_Name The physical resource is set manually using this command, but it is not loaded.
  2. To load a resource in the active session, select its check box and click Load .
    The resource is loaded in the current session. It remains loaded until you close the session.
  3. To unload a resource from the active session, select its check box and click Unload .
  4. To specify a physical resource, if it is not already specified in Data Setup, click and search the resource in the database.

    Notes:
    • The specified resource is saved in a repository.
    • After specifying the resource, you need to load the resource using Load .
    • You can delete the specified physical resource using > Delete .

  5. Close the dialog box.