Orthogonal HVAC Batch Parameters

This section describes the parameters of the Orthogonal HVAC Spool batch.

This page discusses:

Configuration Parameters

Parameters Description Default Value

ConfigurationName

Name of the drawing profile that you want.

MDD-Standard-Ortho-MM

ISOSheetTemplate

Name of the sheet template from the sheet template chapter.

ASD A3-Sheet-For-ORTHO-HVAC-Batch-Drawings

BOMTableTemplate

Name of the table template from the table template chapter.

HVAC BOM Table Template

ISOStartModelName

Name of the start drawing. This drawing is duplicated when a new drawing is generated. For example, a drawing with an empty A3 sheet.

adrw-NAVAJO-00012545

ISOStartModelRevision

Start drawing major revision to be used.

A

Dimension Parameters

Parameters Description Default Value
DimFontSize

Font size of dimension value.

 2.5
DimValueDistToLine Distance of the dimensions value from the dimension line. 1.5
DimDimToGeoDist Distance spool geometry to first dimension line. 14
DimDimToDimDist Distance between dimension line 2,3,4. 9
DimFormatName Description of the dimension value format. Typical value for imperial is: FEET-INC. NUM.DIMM
DimFormatDisplayFactor Dimension Value Factor

1 for NUMM.DIMM.

Use 2 for FEET-INC

 1
DimFormatType Whether dimensions are displayed in decimal format (CATDrwDimFormatDec) or in fraction format (CATDrwDimFormatFrac) as is typical for imperial dimensions. CATDrwDimFormatDec
DimFormatPrecision Number of significant digits for dimension value (or fraction base, for example, 16 for fraction format). 1

HVAC Specific Parameters

Parameters Description Default Value

AttachDrawing
  • 0: Do not attach drawing.
  • 1: Attach drawing under direct father (Pipe or HVAC spool).
  • 2: Attach drawing under assembly.
 0

BOM Parameters

Parameters Description Default Value

BOMPartDescription

Read help documentation, transferred to EKL rule where description is composed.

 1

BOMPipeDescription

Read help documentation, transferred to EKL rule where description is composed.

 2

BOMPipeLengthUnit

Unit to represent length of pipes.

 mm

BOMLengthNbDigits

Number of significant digits for Length.

 0

BOMWeightUnit

Unit to represent weight.

 kg

BOMWeightNbDigits

Number of significant digits for weight.

 1

BOMLengthUnitAppend

Display Unit on length (Boolean).

 TRUE

BOMWeightUnitAppend

Display Unit on weight (Boolean).

 TRUE

BOMPipeGrouping

Group all pipes into one item (Boolean).

 FALSE

Orthogonal HVAC Sheet Template Definition

In the sheet template, define the following Items:

No. Items
View Item: ISO = view port for the isometric view of the spool (mandatory).
View Item: TOP = view port for the TOP view of the spool (mandatory).
View Item: FRONT = view port for the FRONT view of the spool (mandatory).
View Item: LEFT = view port for the LEFT view of the spool (optional).
Table Item: BOM = location for the Bill-Of-Material.
Table Item: BEND_TABLE = location for the Bend Data Table for bent pipes.
Table Item: ORIENTATION_TABLE = location for the Orientation table.