Setting the Batch Resources

You have to set up the batch resources before working with the batch functionality.

See Also
About Data Setup for Drafting Template Design
  1. Log in with the Leader role.
  2. From the top bar, click Add > Import.

    Import the required .3dxml files.

    • AITAC-ISO-CATALOG.3dxml
    • AITAC-ISO-Start-Drawing A.1.3dxml
    • ASD_PipingBatchTemplates.3dxml

  3. Search the AITAC-ISO-Start-Drawing A.1 drawing and open it.
  4. In the tree, right-click the drawing and select Properties. Note down the Name of the drawing.
  5. Open the excel sheets and edit the following entries:

    • For ISO: ISOStartModelName
    • For ORTHO: ORTHOStartModelName

  6. Enter the name (noted in Step 3), and save your changes.
  7. From the top bar, click Add > Content > VDoc.

    Import the two excel files.

  8. Open the AITAC-ISO-CATALOG catalog and verify the name of the chapter with the symbols: ISO-SYMBOLS.

    Remove any prefix/suffix if added during import.

  9. Log in with the Owner role.
  10. From the Compass, select Social and Collaborative Apps , and then select Data Setup.
  11. Create a new ASD Drafting Batch Resource and assign two excel sheets to the appropriate items.
  12. Drag the ASD Drafting Batch Resources to your Collaborative Space and save the changes.
  13. Search the Default Piping Batch Templates and then open it.
  14. Open the Sheet template chapter and the Table template chapter.

    You can use the Retrieve Template Chapter command for easy accessibility.

  15. Insert Piping ISO Sheet Template and Piping ORTHO Sheet Template in the sheet template chapter, and Piping BOM Table Template in the table template chapter.

    Important: The ASD Drafting Resources must be properly configured.