Configuring the Pre-Execute Parameters

You can modify selected CST parameters before running the CST simulation by mapping parameters in the simulation activity to the CST input parameters.

See Also
Executing a CST Simulation
  1. From the Applications section of the action bar, click CST and drop it on the process diagram.
  2. Double-click CST .
  3. From the CST editor that appears, select the Pre-Execute tab.
  4. To map a CST parameter to an activity parameter with the same name, do the following:
    1. Click in the Select column for each parameter that you want to add.
    2. Click OK.
      Optimization Process Composer creates the parameter with the same mode and type.
  5. To map a CST parameter to an existing activity parameter, do the following:
    1. Select the Activity Parameter column.
    2. From the list, select the existing activity parameter to which you want to map.
    3. Click OK.
  6. To map a CST input variable to a new activity parameter, do the following:
    1. Select the Activity Parameter column.
    2. Select Create new.
      The Create New panel appears.
    3. Enter the parameter name.
    4. Optional: Edit the type and mode.
    5. Click OK.
      Optimization Process Composer creates the activity parameter to the activity and maps it to the CST parameter.
  7. Click Ok to save your changes and to close the CST editor.