Configuring the Optimal Latin Hypercube Technique

You can configure the Optimal Latin Hypercube options.

See Also
Optimal Latin Hypercube Technique
  1. From the Flow section of the action bar, click DOE and drop it on the process diagram.
  2. Double-click DOE .
    The DOE Editor appears.
  3. From the General tab's DOE Technique list, select Optimal Latin Hypercube.
  4. Enter the Number of points that you want to study. For each defined factor, the levels are defined by uniformly distributing this number of points between the specified lower and upper values. These levels are randomly combined with other factor levels to define each design point to run.
  5. Enter the Maximum time to optimize (minutes) that the adapter can optimize. Once this time limit is reached, the optimization stops.
  6. Click Use a fixed seed. Select this option to manually specify the seed in the corresponding text box. Type the value of the random seed in the corresponding text box. If this option is not selected, Optimization Process Composer determines the seed randomly.
  7. Click Ok to save your changes and to close the DOE Editor.