-
In the Category box, select a category for the panel.
-
In the Material and Orientation tab,
- Specify the panel material and thickness.
- Set the orientation options.
-
In the Geometry tab, select a required support in the work area in the Support box.
- You can select either a reference plane or a surface from the work area.
- You can also select the reference plane by right-clicking in the
Support box, and choosing Select
Reference Plane.
- You can create a plane or a surface to define the support using other
stack commands.
- Optional:
In the
Offset box, enter the required value by which
the panel should be offset from the support.
-
Specify the limits of the panel.
- You can select:
- Geometrical entities.
- Structural objects. When you select a profile, its trace is
considered as a limiting element.
- A volume or a closed surface.
- Particular faces of the stiffener as the limiting elements.
Press the
Alt key while selecting the stiffener.
It displays the faces which can be selected as a limit.
- You can sketch the boundary by clicking
 .
|
