-
Click
Rule-based Copy
.
-
At the upper right of the Rule-based Copy dialog box,
click Show Preferences
and
specify a rerouting rule.
If the rerouting rule is added in the rules catalog or rules library in Data Setup, it is preselected.
-
Select Translation.
-
In the Source plane box, select a reference plane from which the
translation will be computed.
-
In the Destination plane box, select a reference plane up to
which the translation will be computed.
The destination plane must be parallel to the source plane.
You can select a plane or a structural object (panel or
stiffener). In case of a structural object, its support plane is taken into
account. Recommendation:
It is recommended to select both source and
destination planes from the active structure system.
-
In the objects area, select the structural
objects from the 3D area or the tree.
You can select panels, parametric panels,
stiffeners, stiffeners on free edges, and beams (of all types except the
Beams and Plane type).
-
Select the check boxes of the required structural objects and click
Copy
.
The objects are copied. The new objects are
created under the active structure system.
-
To verify the status of the inputs between the new and original objects, click
Detail Specification
and select a row,
In the Detail Specification dialog box, for the new
objects, you can:
- Replace the inputs either by selecting new elements from the tree or the 3D area, or by creating new wireframe or surface elements using the context menu.
- Flip the orientation of the inputs.
Click Update
.
|