-
From the Loads section of the action bar, click Bolt Torque
 .
- Optional:
Enter a descriptive
Name.
-
Select the support in the model.
You can apply a bolt torque to either a virtual bolt connection or a meshed bolt
section.
- Enter the Torque value.
- Enter the Torque coefficient.
- Optional: Enter a Scale factor that is applied to the magnitude in each step.
- Optional: Select an
Amplitude that
defines the magnitude during the
step.
- Optional:
For harmonic response steps, specify the Phase angle for
the amplitude curve. The phase angle determines the real (in-phase) and
imaginary (out-of-phase) parts of the magnitude. A phase angle of 0ยบ indicates a
value with no imaginary component.
-
Click OK.
|