-
From the Simulate section of the action bar,
click Design Space Checks
.
- Optional:
Enter the number of Points to sample and click
Refresh
.
The scatter plot or table view is updated with the new list of points to
verify.
-
From the Level of checks options, select one of the following:
Option | Description |
---|
Model |
Verifies that you can rebuild the product with the new design variable
values. |
Model + Mesh |
Verifies the model and mesh generation. |
Model + Mesh + Scenario |
Verifies the model, mesh, and updated scenario features (such as loads and
boundary conditions). |
- Optional:
Clear the Update model during check check box to skip updating
the model view to show the design that is being checked.
Updating the model view for a complex design can use significant resources. Note:
This option is activated only when you use Check All
Points.
- Optional:
Select Show only failed points.
Review all failures to look for patterns to reduce or eliminate them from the design
variables.
-
Click Check All Points to test all the sample points.
The results are updated to identify points that passed (green) or failed
(red).
-
Optional: You can click a single point or use Shift
+ click to select multiple points, then use the context menu
to run checks on the selected points.
Checking a single point allows you to see details that might help you diagnose why
that point failed.
|