Adding Components to a Process

You can create a new simulation process by placing components in the flow.

See Also
Inserting Gateways to Create Branches
About the Main Step in a Simulation Activity
  1. From the landing page, select Create new simulation process .
    An empty process diagram appears.
  2. Add an activity to your process. From the Flow section of the action bar, click Activity . Click again on the line in the process diagram to place the activity in the process.
    The simulation activity is added to the process.
  3. Add an adapter to your process. From the Utilities section of the action bar, click Upload adapter . Click again on the line in the simulation activity to place the activity in the process.

    Placing an adapter directly into the simulation flow creates a new activity to contain it.

    The adapter is added as a step in the process.
  4. Optional: Build out your process by adding to the flow.

    • Add more adapters; an activity can include multiple adapters as steps.
    • Insert gateways to create branches.
    • Add an activity outside of the flow. You can configure an activity without including it in the simulation process. For example, if you would like to include it later, or if you only partially configure it now.